How to Identify Potential Asbestos in Your Home — Ames, Iowa
Complete checklist with climate-adjusted recommendations for Ames, Iowa
Overview
Common in popcorn ceilings, floor tiles, pipe insulation, and siding before 1980. Do not disturb — test first.
Step-by-Step Guide
Research your home's construction date
Check county property records, the original building permit, or your home inspection report to determine the year the home was built. Homes constructed before 1980 have a significantly higher likelihood of containing asbestos-containing materials (ACMs). Homes built between 1920 and 1978 are at the highest risk.
Learn where asbestos is commonly found
Asbestos was used in dozens of building products. The most common locations include: popcorn (acoustic) ceilings installed before 1980, 9-inch vinyl floor tiles and the black mastic adhesive beneath them, pipe insulation and boiler wrapping in basements and utility areas, vermiculite attic insulation (especially the Zonolite brand), cement siding shingles, and older duct tape or joint compound.
Perform a visual inspection without disturbing materials
Walk through your home and note any suspect materials. Look for deteriorating or friable (crumbly) insulation on pipes, discolored or damaged ceiling texture, old floor tiles that are cracking or lifting, and any insulation with a grayish-white fibrous texture. Do not touch, scrape, poke, sand, or drill into anything you suspect may contain asbestos.
Look for warning signs of damaged ACMs
Asbestos is most dangerous when disturbed. Check for: water damage that has softened ceiling textures, peeling or crumbling pipe insulation, cracked or broken floor tiles exposing the mastic below, and any areas where prior renovation work may have cut into suspect materials. If materials are in good condition and undisturbed, they generally pose low risk.
Hire a certified asbestos inspector for testing
Only a certified asbestos inspector should collect samples. They will take small pieces of suspect material using proper containment procedures, then send them to an accredited laboratory for polarized light microscopy (PLM) or transmission electron microscopy (TEM) analysis. Testing typically costs $25-$75 per sample and results come back in 3-7 business days.
Understand your testing results
Lab results will indicate the percentage of asbestos in each sample. Materials with more than 1% asbestos are classified as asbestos-containing. If results are positive, do not panic — asbestos in good condition is usually best left undisturbed. Your inspector can advise whether encapsulation (sealing in place) or professional abatement (removal) is the appropriate next step.
Create a management plan for confirmed asbestos
If asbestos is confirmed, document the location, condition, and type of each ACM on a floor plan. Label areas so future contractors are aware. Schedule periodic inspections (every 6-12 months) to check for deterioration. If you plan any renovation that would disturb ACMs, hire a licensed asbestos abatement contractor before any other work begins.
What You'll Need
Tools
- - Flashlight
- - Notepad or phone for documentation
- - Camera for photos of suspect areas
Cost Estimates
DIY Cost
$0 (visual inspection only — testing requires a professional)
Professional Cost
$200-$800 for inspection and testing; $1,500-$30,000+ for abatement depending on scope
Safety Tips
- Never scrape, sand, drill, or break apart materials you suspect contain asbestos.
- Do not sweep or vacuum debris from damaged suspect materials — this releases fibers into the air.
- If you accidentally disturb suspect material, leave the area immediately, close the door, and do not re-enter until a professional assesses it.
- Asbestos fibers are invisible to the naked eye — you cannot determine if a material contains asbestos by looking at it.
- Keep children and pets away from damaged or deteriorating suspect materials.
When to Call a Professional
Always call a certified asbestos inspector before any testing. Never attempt to collect samples yourself. Call an abatement professional if materials are damaged, deteriorating, or if you plan any renovation that would disturb suspect materials.
Pro Tip
If you are buying an older home, request asbestos testing as part of your home inspection contingency. It is far cheaper to test before closing than to discover asbestos mid-renovation when project timelines and budgets are already set.
Common Mistakes to Avoid
- Scraping popcorn ceilings without testing first, releasing asbestos fibers throughout the home.
- Pulling up old floor tiles by hand instead of having them tested and professionally removed.
- Assuming that because a material looks fine, it cannot contain asbestos.
- Using a home test kit improperly and getting a false negative — professional sampling is far more reliable.
- Disturbing pipe insulation during a plumbing repair without checking for asbestos first.
Local Professionals in Ames
Ames Housing Market
Median Household Income
$60,102
Median Home Value
$263,800
Median Rent
$1,040/mo
Homeownership Rate
42.9%
Population
66,112
Median Year Built
1991
Source: U.S. Census Bureau, ACS 2023 5-Year Estimates
Fair Market Rents — Ames
Studio
$972/mo
1 Bedroom
$1,026/mo
2 Bedroom
$1,153/mo
3 Bedroom
$1,601/mo
4 Bedroom
$1,934/mo
Source: HUD FY2026 Fair Market Rents — Ames, IA HUD Metro FMR Area
This Task Appears On
Related How-To Guides
How to Evaluate an Old Electrical System
Knob-and-tube wiring, aluminum wiring, and undersized panels are common in older homes.
How to Inspect and Maintain Original Woodwork
Older homes often have irreplaceable wood details. Repair and refinish rather than replace.
How to Consider a Professional Energy Audit
A BPI-certified auditor uses blower door tests and thermal imaging to find invisible energy waste.