How to Prune Trees and Shrubs — Ames, Iowa
Complete checklist with climate-adjusted recommendations for Ames, Iowa
Overview
Remove dead, damaged, or crossing branches. Shape flowering shrubs after they bloom. Do not top trees -- proper pruning preserves the tree's structure, health, and appearance.
Step-by-Step Guide
Identify what needs pruning
Start by looking for the three D's: dead, damaged, and diseased branches. Dead branches have no buds or green under the bark. Damaged branches are cracked, split, or hanging. Diseased branches may have cankers, discolored bark, or fungal growth. These should always be removed regardless of the season.
Remove crossing and rubbing branches
Branches that cross and rub against each other create wounds that invite disease and pests. Remove the weaker or less well-positioned branch of a crossing pair. Cut it back to its point of origin or to a lateral branch growing in a better direction.
Make proper pruning cuts
For branches, use the three-cut method: (1) undercut one-third through the branch about 12 inches from the trunk, (2) cut from the top a few inches farther out to remove the branch weight, (3) make the final clean cut just outside the branch collar. Never cut flush with the trunk -- the collar helps the tree heal.
Thin the canopy for airflow
Remove inward-growing branches and water sprouts (thin, upright shoots growing from larger branches). The goal is an open canopy that allows air circulation and light penetration. Do not remove more than 25% of the living canopy in a single season.
Shape flowering shrubs at the right time
Shrubs that bloom on old wood (forsythia, lilac, azalea, rhododendron) should be pruned immediately after flowering. Shrubs that bloom on new wood (butterfly bush, hydrangea paniculata, roses) can be pruned in late winter or early spring before new growth begins.
Reduce shrub height gradually
If a shrub has grown too tall, do not shear it flat. Instead, selectively cut the tallest stems back to a lower lateral branch or to the base (renewal pruning). Remove about one-third of the oldest, tallest stems each year over three years to rejuvenate the shrub without shocking it.
Clean and disinfect your tools
After pruning diseased wood, wipe blades with rubbing alcohol or a 10% bleach solution between cuts to prevent spreading pathogens. At the end of the session, clean all tools, dry them, and apply a light coat of oil to prevent rust. Sharp tools make cleaner cuts that heal faster.
What You'll Need
Tools
- - Hand pruners (bypass style for live wood)
- - Loppers (for branches up to 2 inches)
- - Pruning saw (for branches 2-4 inches)
- - Pole pruner (for overhead branches)
- - Rubbing alcohol or bleach solution (for disinfecting)
- - Safety glasses
- - Work gloves
Materials
- - Rubbing alcohol or 10% bleach solution
- - Light machine oil (for tool maintenance)
- - Yard waste bags or a chipper
Cost Estimates
DIY Cost
$0 - $50 (tool maintenance)
Professional Cost
$200 - $1,000+ (per tree, depending on size and complexity)
Safety Tips
- Never prune branches near power lines -- call your utility company for that work.
- Wear safety glasses when pruning overhead to protect against falling debris.
- Use a pole pruner or hire a pro for branches higher than you can reach from the ground. Do not climb trees with a chainsaw.
- Be cautious with spring-loaded loppers -- keep fingers away from the pivot point.
- Do not apply pruning sealant or wound paste -- research shows trees heal better without it.
When to Call a Professional
Hire a certified arborist for any branches over 4 inches in diameter, for work that requires climbing or a bucket truck, for trees near power lines or structures, or for diagnosing tree diseases. Professional pruning costs more but prevents damage from improper cuts.
Pro Tip
Never top a tree. Topping (cutting the main leader or large branches back to stubs) destroys the tree's structure, promotes weak regrowth, and creates a long-term hazard. If a tree is too large for its space, consult an arborist about reduction pruning or removal.
Common Mistakes to Avoid
- Topping trees -- this weakens the tree and creates dangerous weak-branch regrowth.
- Cutting flush with the trunk -- always leave the branch collar intact.
- Pruning spring-flowering shrubs in late winter, which removes all the flower buds for that year.
- Removing more than 25% of a tree's canopy in one season -- this stresses the tree.
- Using dull tools that crush and tear branches instead of making clean cuts.
- Pruning in late summer or early fall, which stimulates new growth that won't harden off before winter.
- Applying wound sealant -- it actually slows healing and can trap moisture and disease.
Local Landscapers in Ames
0Munoz Landscaping LLC
West Des Moines, IA
(515) 444-7401Griff Lawn And Landscape
West Des Moines, IA
(515) 577-3335Perficut
West Des Moines, IA
(515) 965-0951Founding Member
Premium spot in Ames
Ambassador
Lead the Ames community
Founding Member
Premium spot in Ames
Ames Housing Market
Median Household Income
$60,102
Median Home Value
$263,800
Median Rent
$1,040/mo
Homeownership Rate
42.9%
Population
66,112
Median Year Built
1991
Source: U.S. Census Bureau, ACS 2023 5-Year Estimates
Fair Market Rents — Ames
Studio
$972/mo
1 Bedroom
$1,026/mo
2 Bedroom
$1,153/mo
3 Bedroom
$1,601/mo
4 Bedroom
$1,934/mo
Source: HUD FY2026 Fair Market Rents — Ames, IA HUD Metro FMR Area
This Task Appears On
Related How-To Guides
How to Aerate and Overseed Your Lawn
Fall is the best time to aerate compacted soil and overseed thin areas for cool-season grasses. Aeration lets water, air, and nutrients reach grass roots, while overseeding fills in bare spots for a thicker lawn.
How to Remove Winter Debris and Dead Plants
Clear fallen branches, dead leaves, and any winter-killed plants from beds and lawn. A thorough spring cleanup prevents disease, improves curb appeal, and gives healthy plants room to grow.